225/45r17 Tire Pressure

Choice of versionTyre sizes available for 225 40 R18 88 Y 225 45 R17 91 W Tyre pressure for AUDI TT Quattro 1.8 T 225 (1998)Front tyre pressure :2.4 barsRear tyre pressure :2 barsFront tyre pressure (loaded vehicle) :2.4 barsRear tyre pressure (loaded vehicle) :2.3 barsThe tyre pressures indicated above are given for information only. For more information, please check the indications in your vehicle manual or on the front door of your vehicle. Practical info for AUDI TT Quattro 1.8 T 225 (1998)Body :CoupéDrive power :PetrolPower :225 hpCubic capacity :1781 ccMax. speed :151 mphFront rim width (in inches) :7.5 "Rear rim width (in inches) :7.5 "Drive type :4 Wheel DriveTransmission :ManualAdmissible load on front axle :1040 kgAdmissible load on rear axle :870 kgOther available engine typesDiesel2.0 TDI 170 tyresPetrol1.8 T 180 tyres1.8 T 225 tyres1.8 T 239 tyres2.0 TFSI 230 tyres2.0 TFSI 200 tyres2.0 TFSI 211 tyres3.2 V6 250 tyres All the data presented on this page is protected, for more information click here
GET YOUR FREE TIRE QUOTE TODAY! Plaza Tire Service has over 100,000 tires available for your car, truck, van or SUV including tires from Bridgestone, Yokohama, Firestone, Dayton, Michelin, BFGoodrich, Falken, Nokian and Dick Cepek off-road tires.  With its volume buying and 52 years in the tire business, Plaza Tire Service passes along low prices to its customers.  Plaza Tire Service’s inventory and low prices make it easy for you to find the tires you need in one visit, no shopping around necessary. $20 Off A Purchase Over $200... $99.95 Front Brake Service... $10 Off Any Alignment... 225 45 R17 91 Y 205 55 R16 91 H (Winter dimension) Tyre pressure for AUDI S3 1.8 T 225 (2001)Front tyre pressure :2.1 barsRear tyre pressure :2.1 barsFront tyre pressure (loaded vehicle) :2.4 barsRear tyre pressure (loaded vehicle) :2.9 barsThe tyre pressures indicated above are given for information only. Practical info for AUDI S3 1.8 T 225 (2001)Body :Saloon carDrive power :PetrolPower :225 hpCubic capacity :1781 ccMax.
speed :151 mphFront rim width (in inches) :7.5 "Rear rim width (in inches) :7.5 "Drive type :4 Wheel DriveTransmission :ManualAdmissible load on front axle :1040 kgAdmissible load on rear axle :1050 kgOther available engine typesPetrol1.8 T 210 tyres1.8 T 225 tyres2.0 TFSI 265 tyres2.0 TFSI 256 tyres2.0 TFSI 280 tyres2.0 TFSI 300 tyresHow To Reset the Low Tire Pressure Sensor on a 2008 Nissan Sentra Tire pressure monitoring systems became a staple on luxury cars in the late 1990s. Homes For Sale In Westminster Heights Opelousas LaThrough the 2000s, buyers began seeing TPMS on some high-end domestic cars and light trucks. Roman Blinds TickingThis system came in two styles early on, direct and indirect. Nordic Hot Tub Factory Store
The indirect TPMS system used the anti-lock brake system to measure wheel speed. If one wheel rotated at a slower rate than the other three, an indication of low pressure, the TPMS system would kick on. The direct system has a pressure sensor inside the rim that relays pressure to the TPMS computer. Park the Sentra near a compressed air source that has a tire inflation chuck. Unscrew the caps from the valve stem – the valve protruding from the rim – on each of the four tires and place them in a secure area to prevent losing them. Check the tire pressure on all four wheels by pressing the end of the tire pressure gauge onto the end of the valve stem. Read the pressure measured by the tire gauge and notate the pressures on all four tires. Nissan recommends always checking and filling your tires when they are cold, but you can check them hot if you are pressed for time. Read the sidewall of the tire and find the size stamped on it. You will have one of three sizes: 205/60R15, 205/55R16 or 225/45R17.
The recommended tire pressure for these tires is 33 psi, 33 psi and 35 psi, respectively. Compare the pressure measured in step 2 to the manufacturer's recommended pressure for the Sentra’s tires to determine which tires need additional air. Press the tire inflation chuck connected to the compressed air source onto the end of the valve stem firmly to start the flow of air into the tire. A good rule of thumb when inflating a tire is that for every three to five seconds of inflating the tire, you add about 1 psi to the tire. Using the formula in step 4, hold the tire inflation chuck for the amount of time needed to bring the pressure back up to the manufacturer’s specifications. Remove the tire inflation chuck and check the air pressure with a tire gauge. Repeat this step as needed until the tire reaches the manufacturer’s specification. If you overfill the tire, don’t fret, as you can simply press the small button inside the top of the valve stem with a pen or the tip of the tire pressure gauge to release some air.
Screw the caps back onto the valve stems. Drive the car to speeds above 16 mph and watch for the “Low Tire Pressure” light – located on the instrument cluster – to turn off. If the light does not turn off, recheck the tire pressure. If all the tires check out, there may be a malfunction in the tire pressure monitoring system. Digital Vision./Digital Vision/Getty Images Allow the vehicle to sit until the tires are cold. Repeat steps 1 to 7 to obtain the correct “cold” tire pressure – the base-level pressure for the tires. Many gas stations and auto repair shops provide free air for tires. In 2007, direct TPMS became a federally mandated safety device on all vehicles sold in the United States. Resetting the TPMS light in a 2008 Sentra is no more difficult than adding air to the tires. If you have aftermarket rims and tires that do not match up to the factory-installed size and do not remember what size the car had originally, you can find this information on the tire information placard on the driver’s door jamb.