screens are part of the most comprehensive manual solar protection and room-darkening system available. and EuroVeil® (visually-transparent sunscreens and room-darkening shades), a full range of hardware options for manual shading (including multi-band operation with one drive chain), and our Lifetime Limited Warranty with 100% replacement and no depreciation over the life of the warranty.These release notes describe version 1.12.0 of the OpenStudio software suite developed by the National Renewable Energy Laboratory (NREL), Buildings and Thermal Systems, Commercial Buildings Research Group, Tools Development Section, and associated collaborators. The notes are organized into the following sections: Where to Find OpenStudio Documentation OpenStudio release documentation, including these release notes, tutorials, and other user documentation, is available at https://www.openstudio.net/. Measure development documentation is available at http://nrel.github.io/OpenStudio-user-documentation/reference/measure_writing_guide/.

OpenStudio is supported on Windows 7 – 10, OS X 10.9 – 10.10, and 64-bit Ubuntu 14.04. OpenStudio 1.12.0 supports EnergyPlus Release 8.5.0, which is bundled with the OpenStudio installer. It is no longer necessary to download and install EnergyPlus separately. Other builds of EnergyPlus are not supported by OpenStudio 1.12.0. OpenStudio 1.12.0 supports Radiance 5.0.a.8, which is bundled with the OpenStudio installer. It is no longer necessary to download and install Radiance separately. Other builds of Radiance are not supported by OpenStudio 1.12.0. The OpenStudio SketchUp Plug-in requires SketchUp 2016 (not available for Linux). The OpenStudio SketchUp Plug-in does not support older versions of SketchUp. SketchUp 2016 is available in 32 and 64-bit versions; the 32-bit version of OpenStudio on Windows will only work with the 32-bit version of SketchUp 2016, and the 64-bit version of OpenStudio will only work with the 64-bit version of SketchUp 2016. If the OpenStudio Plug-in does not automatically load in SketchUp, open the Window->Preferences->Extensions window in SketchUp and enable the OpenStudio plug-in if it is listed.

Download and install OpenStudio. Setup a Building Component Library (BCL) account to access online building components and measures. View instructions on how to setup your account and configure the key in OpenStudio. Starting with 1.11.1, OpenStudio has included a new Ruby library called openstudio-standards. Cuny T ShirtsThis library allows users to create the DOE Prototype Building and DOE Reference Building models in OpenStudio format. Suzuki Sx4 Headlight Bulb SizeThese models represent 16 different building types across all of the US climate zones for 6 vintages: pre-1980, 1980-2004, 90.1-2004, 90.1-2007, 90.1-2010, and 90.1-2013. Used Tires In Gloucester VaThese models can be used for tasks like portfolio-scale studies and energy code change impact analysis.

These models also provide examples of how to model a wide variety of 90.1 energy code requirements in OpenStudio. Model coverage has been expanded in OpenStudio 1.12.0, with the addition of 3 new OpenStudio model classes (SiteGroundTemperatureDeep, SiteGroundTemperatureShallow, and SiteGroundTemperatureFCfactorMethod), and the extension of the existing class ChillerElectricEIR with the addition of heat recovery. OpenStudio 1.12.0 includes many bug fixes. For a full list of changes included in OpenStudio 1.12.0, please see the complete changelog. Issue Statistics Since Previous Release 65 new issues were filed since the 1.11.0 release of OpenStudio (not including opened pull requests). 38 issues were closed since the 1.11.0 release of OpenStudio (not including closed pull requests). Luxaflex® offers a comprehensive suite of Building Information Modelling (BIM) tools, (ArchiCAD, Revit and Sketchup formats available) and Luxaflex® branded Masterspec sections.

These tools along with technical product data are available for download below. Luxaflex® technical data and BIM content is also available from on Productspec and BIMSTOP. Luxaflex® is committed to continuing to build its comprehensive suite of specification tools for the industry. For more information on Luxaflex® Commercial Partners To contact either Luxaflex® for technical information on Luxaflex® products or if you would like some help with specification details please contact: Luxaflex National Sales Manager | Luxaflex Contract Manager | Need help to identify the best solution for your project? Find a commercial window shade consultant.June 12th, 2009 in blogs If you've been using SketchUp to model your woodworking projects, you've probably gone through the exercise of drawing in dovetail joints. I've demonstrated ways to draw them in previous blog posts. They aren't difficult to draw but you need to be careful with your layout to make them look proper.

I guess its the same way in real wood, though, isn't it? The other day I received an e-mail from Tim,  a fellow woodworker, SketchUp user and blog reader asking me to take a look at a plugin he's written. I couldn't wait to get a chance to try it out. He's done an excellent job of simplifying the task of drawing this common joint with a dialog box. After you enter the values for the layout, The lines for the joint are drawn vertically at the origin. If your dovetail joint is located in the right spot, all that remains is to use the Push/Pull tool to push away the waste. More likely though, it'll be something like this. Here I've drawn a simple box. The pairs of sides are instances of the same components and I've flipped one copy of each the the outside faces are properly oriented all the way around. I used the Flip operation but you could also use Scale and -1 to do the same thing. Next I chose the plugin from the Plugins menu. I made the desired settings and clicked OK.

The dialog box will accept entry in decimal or fractional units and the angle can be entered as a ratio, i.e. 1:6, 1:8, etc. or in degrees. If you enter 8, it will be understood as 8° while 1:8 will be recognized as a slope ratio. The dovetail joint is drawn as a collection of line segments. I show it as selected in the image, above. Since I want to use the same joint on all four corners I copied the lines with the Move tool and placed it at the corner of the box. I also copied the lines to the opposite end of the long side and flipped them so they were oriented correctly. With both sets of lines select, I chose Cut from the toolbar. You can also use Ctrl+X on the PC or Opt-X on the Mac or pick it out of the Edit menu. Then I opened the component for editing and, from the Edit menu, chose Paste in Place. A little Push/Pull action to get rid of the waste came next. Then I copied the original lines again and placed them at opoosite ends of the pin board.Push/Pull again to get rid of the waste and The dovetail joints are complete all the way around.